Note: 2 3/8inch Inlet / 4 1/2inch Outlet Note: Case Size: 14inch Diameter: 6 3/4inch Made with the same patented, award and race winning flow through design as the Standard XR-1® Collector/ Muffler. This Muffler however is designed for door car applications where a Standard size Collector/Muffler is too large. Not recommended for Dragster application. Deep Tone! Unique Borla Rumble! Fully Welded Case! Woven Stainless Steel Packing Will Never Blow Out! T-304 Stainless Steel Construction! HP & Torque: 5% Increase Typical Installation: This muffler is intended for use on custom exhaust systems and is not designed as a direct fit or bolt-on component. It is the responsibility of the purchaser to have this part installed. Please be extra careful when selecting your muffler and pay special attention to the configuration and dimentions of each muffler. If you are not sure which muffler is right for your application we encourage you to contact your local muffler shop. There are NO RETURNS on mufflers! Cancellations are subject to a minimum 10% restocking fee. Tech Notes: Recommended for high performance street/strip applications, late model trucks with single or dual exhaust. |
|
Hop Up Racing 204 N. El Camino Real STE E#332 Encinitas, CA 92024 Tel.: 760.942.2503 · Fax: 760.942.1795 sales@hopupracing.com
www.hopupracing.com - Online
Speed Shop For Import and Domestic Autos NOTICE TO CONSUMER:
Some of the products we sell are for racing and off-road
vehicle only, lighting products are solely as auxiliary lighting. Please check
with your local DMV or vehicle department for regulations and information. Hop
Up Racing is not responsible for any legal issues regarding any of the products
purchased from this site. For your own concern, please make sure of your orders
and the legality of the product before making any purchases.
 |
">