Questions? Call Us (760)942-2503
MON-FRI 10:00 AM-5:00 PM PST
Apexi N1 EVO Cat-Back Exhaust Toyota MR2 & MRS Spyder
Apexi N1 EVO Cat-Back Exhaust Toyota MR2 & MRS Spyder
91-95 MR-2 (Racing use only) 75mm-85mm
00+ MR-2 Spyder 60mm
The A'pex Integration N1 exhaust system is one of the most recognizable exhausts in the import scene. It was the first angled muffler to utilize a silencer and megaphone style piping. The piping utilizes a mild steel titanium particle powder coating to flow expended exhaust gasses out through a polished SUS 304 stainless steel canister. The N1 also uses a large noticeable tip with silencer. This exhaust system has been put to the test in virtually every tuning magazine. These conclusive results have proven the N1 to be one of the most reliable, powerful, and cost effective mufflers on the market. The robotic TIG welding separates the N1 from its cheap imitators. The N1 has been used in drag, circuit, rally, and street events. Since this exhaust was created through the direct participation in the N1 Endurance Series in Japan, there is no mistaking its potential. The simple yet effective design will stand the test of time. This is truly the one, the original!
Polished Stainless Steel Muffler with Optional Silencer
Straightest Possible with Least Number of Pipe Bends
Thoaty Sound at Wide Open Throttle
Robotic TIG Welds and Rust Preventive Coating
Large Aggressive Rear Tip
HP & Torque: 10-12 HP/10 ft lbs Torque
Installation: Hangs from the same hanger locations as the factory exhaust and comes complete with all necessary hardware and instructions.
Tech Notes: Optional 90mm Super Silencers can be used to reduce noise levels by up to 7 decibels.
91-95 MR-2 (Racing use only) 75mm-85mm
00+ MR-2 Spyder 60mm
The A'pex Integration N1 exhaust system is one of the most recognizable exhausts in the import scene. It was the first angled muffler to utilize a silencer and megaphone style piping. The piping utilizes a mild steel titanium particle powder coating to flow expended exhaust gasses out through a polished SUS 304 stainless steel canister. The N1 also uses a large noticeable tip with silencer. This exhaust system has been put to the test in virtually every tuning magazine. These conclusive results have proven the N1 to be one of the most reliable, powerful, and cost effective mufflers on the market. The robotic TIG welding separates the N1 from its cheap imitators. The N1 has been used in drag, circuit, rally, and street events. Since this exhaust was created through the direct participation in the N1 Endurance Series in Japan, there is no mistaking its potential. The simple yet effective design will stand the test of time. This is truly the one, the original!
Polished Stainless Steel Muffler with Optional Silencer
Straightest Possible with Least Number of Pipe Bends
Thoaty Sound at Wide Open Throttle
Robotic TIG Welds and Rust Preventive Coating
Large Aggressive Rear Tip
HP & Torque: 10-12 HP/10 ft lbs Torque
Installation: Hangs from the same hanger locations as the factory exhaust and comes complete with all necessary hardware and instructions.
Tech Notes: Optional 90mm Super Silencers can be used to reduce noise levels by up to 7 decibels.
eCommerce Design by Solid Cactus.
Performance auto parts at great prices. Shop our wide selection of cold air intakes, exhausts, lowering springs, carbon fiber hoods and suspension parts.