Apexi N-1 Universal Muffler (Colored)
Universal Series Mufflers can be used in the fabrication of practically any exhaust system. The unit consists of a canister and tip, which must be welded onto custom piping. Sound levels must be controlled through piping diameter and the effective use of resonators. The 80mm inner diameter (ID) mufflers are recommended for turbo cars while the 60mm ID mufflers are recommended for naturally asperated vehicles.
N1 Canister with 90mm Tip
Note: 60mm Inlet
Due to the overwhelming popularity and benchmark standard of the A'PEXi N1 systems, it was only natural that this muffler was offered as a universal. Now, the N1 can be enjoyed on virtually any vehicle. Similar to the cat-back system, the N1 universal uses premium polished SUS 304 stainless steel constructed using both robotic and hand crafted welding. Straight through design ensures maximum power on properly tuned exhaust systems. Since this muffler is universal, the output angle of the exhaust can also be determined by the customer during installation. Create your own custom N1 look while enjoying the power!
60mm (2.36inch) Inlet
90mm (3.54inch) Tip
Polished Stainless Steel
Straight Through Design
Cost Effective and Versatile Choice
HP & Torque: 5% Increase HP
Installation: This muffler is intended for use on custom exhaust systems and is not designed as a direct fit or bolt-on component. It is the responsibility of the purchaser to have this part installed. Welding is required. Brackets and hangers are not included. There are NO RETURNS on mufflers! Cancellations are subject to a minimum 10% restocking fee.
Tech Notes: Horsepower gains will vary according to vehicle and exhaust piping configuration. Use of a resonator is recommended for street car applications (not included).